Metal on metal sound
#11
No offense, but your descriptions suck. lol. Try to make a YouTube video of the abnormal running condition, whether that's driving or sitting in the driveway (have someone sit shotgun and film if you're driving). That will help give a better idea of where to start looking. Just don't make it with a crappy cell phone.
#12
What plugs did you use? anything but copper plugs will cause issues. did you use dielectric grease on the cop's? and for future changes I hope you used anti-seize!
why would there be pb blaster in the cylinder? please provide more info
Posted from MustangForums.com App for Android
why would there be pb blaster in the cylinder? please provide more info
Posted from MustangForums.com App for Android
OP, did you clean out the threads and cylinder before putting the new plug in? Sounds like you could've had some broken porcelain in the cylinder. Unless you vacummed out the combustion chamber (Tube and shop vac) that's probably what you heard.
Last edited by Derf00; 05-03-2013 at 02:33 PM.
#13
I've considered the porcelain I did blow out excess but did not have a vacuum to remove other waste. If its porcelain now what?
I apologize for the video it was a short notice and needed se stress relief fast ,
I do not have Any cel for a misfire and I'm not noticing a really large jump like a misfire but only90 percent sure.
I apologize for the video it was a short notice and needed se stress relief fast ,
I do not have Any cel for a misfire and I'm not noticing a really large jump like a misfire but only90 percent sure.
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
mrappe
V6 (1994-2004) Mustangs
0
09-26-2015 10:16 AM