2000 Mustang Convertible - blue printed block - makes 400hp on dyno
09-13-2008, 05:16 PM
#1
2nd Gear Member
Thread Starter
Join Date: May 2007
Location: North Carolina
Posts: 318
2000 Mustang Convertible - blue printed block - makes 400hp on dyno
2000 Mustang GT Convertible. 5spd. Has 62k on odometer. (engine has maybe 15k) New windsor block, balanced blue printed (I have all the receipts and build sheet for the engine and everything else). Vortech supercharger. It did 392hp on the dyno. The engine is capable of holding much more power, everything in it is forged. But I just dont need to go any faster than that. Its got leather, 42lb injectors, air/fuel gauge, boost gauge, 3.55 gears, upper and lower control arms, top is in perfect condition. Cobra wheels, Cobra RR hood.
Link to dyno pull :<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/y3Kl14EDF7g"> </param> <embed src="http://www.youtube.com/v/y3Kl14EDF7g" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>
Car is located very near Fort Bragg, NC
Lots of other parts on the car I listed the important ones. Any questions ask. This is a very nice car, not cheaply done and very well taken care of. I'm taking offers on it and possible trades but serious ones only. Thanks.
Link to dyno pull :<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/y3Kl14EDF7g"> </param> <embed src="http://www.youtube.com/v/y3Kl14EDF7g" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>
Car is located very near Fort Bragg, NC
Lots of other parts on the car I listed the important ones. Any questions ask. This is a very nice car, not cheaply done and very well taken care of. I'm taking offers on it and possible trades but serious ones only. Thanks.
09-13-2008, 05:19 PM
#2
2nd Gear Member
Thread Starter
Join Date: May 2007
Location: North Carolina
Posts: 318
09-14-2008, 12:55 PM
#4
2nd Gear Member
Thread Starter
Join Date: May 2007
Location: North Carolina
Posts: 318
willing to accept resonable offers.
09-14-2008, 01:41 PM
#5
You've got to post a price, or at least a number and "Or Best Offer". You also need to post some pictures.
09-15-2008, 05:53 PM
#6
2nd Gear Member
Thread Starter
Join Date: May 2007
Location: North Carolina
Posts: 318
$16k dollars - how do I post pictures on here? I did post a video of it though. With proof for the dyno pull...
09-17-2008, 05:41 PM
#7
2nd Gear Member
Thread Starter
Join Date: May 2007
Location: North Carolina
Posts: 318
oh has 03 cobra brake kit too...
09-18-2008, 03:24 PM
#8
2nd Gear Member
Thread Starter
Join Date: May 2007
Location: North Carolina
Posts: 318
I'd take trades on a 1967-1970 Mustang as well....
09-28-2008, 04:14 PM
#9
2nd Gear Member
Thread Starter
Join Date: May 2007
Location: North Carolina
Posts: 318
bump...
10-02-2008, 04:28 PM
#10
2nd Gear Member
Thread Starter
Join Date: May 2007
Location: North Carolina
Posts: 318
........