If you are looking to get a performance boost and nice sound out of your 2011+ Mustang GT without emptying your wallet, Stainless Works has created the Stainless Power Headers, now offered by ModBargains.com. These headers connect to the factory exhaust (or are also offered as headers ONLY). As always with Stainless Works, these headers are CNC Mandrel Bent, and made with 304 stainless steel, and the primary tube size is 1 7/8".





Stainless Works Mustang GT Factory Headers


If you think your stock Mustang GT is mean, wait until get you a set of these Stainless Works Factory Connect Headers. These headers have 1-7/8" primary tubes for increased top end power, a 3" X-Pipe Crossover to help air continue to flow via the path of least resistance, and 3" Diameter lead pipes for maximum air flow. Not only do these headers look great, the Stainless 304 Steel also helps increase durability and sound. This bolt-on set up will replace your factory manifolds, catalytic converters, and the H-Pipe cross over.

These Stainless Works Mustang GT headers come Tig welded and with 3/8" flanges. An integrated merge spike is added into the slip fit connectors, further increasing airflow and power.


Stainless Works Mustang GT Factory Headers


If you have any questions, please don't hesitate to send over a PM/email or call me at 714.582.3330 extension 8002, or ask for Jurrian!

If you're looking to get some deep, hot-rod tones out of your Mustang GT/ Shelby GT 500, the 3" Stainless Works Exhaust set up can help. With a factory connection the system is simple to install. It is made of high quality 304L stainless steel, and is bent using the latest CNC Mandrel Bending techniques to ensure maximum airflow. Dual Retro Chambered, or Chambered Round, mufflers provide that deep tone and the four inch slash-cut polished tips add style as they exit the rear bumper on either side of your Mustang GT/ Shelby GT500.


Stainless Works Dual Retro Chambered Exhaust Mustang GT 2011-2012


If you are looking for some quick and easy power out of your 2011+ Mustang GT, the Stainless Works X-Pipes cross over can help. Made from 304 Stainless Steel, the 3" diameter X-Pipes replace the OEM H-Pipe. The Off-Road version connects to manifolds, replacing the catalytic converters as well. The standard version connects to factory catalytic converters. To ease the process of installation, the X-Pipes are bolt on, making this power upgrade a quick and easy installation.


Mustang GT X-Pipes by Stainless Works

If you have any questions, please don't hesitate to send over a PM/email or call me at 714.582.3330 extension 8002, or ask for Jurrian!