damibu

So I'm doing a kenne bell build and I just needed some opinion on this setup. I got a lightning 90mm MAF and I want to use it for my build. Some people aren't recommending this but I'm about out of build funds.. Id rather not buy a $250+ slot style maf..

I just want some opinions to this setup. I'm shooting for 460-480 to the wheels, will the lightning maf hang?

tx_zstang

Yup, perfect. It's what comes in the KB kit, and what I used at first.
There should be a 4-wire plug that plugs into the MAF, that you route around the front of the car and splice into the stock MAF wires on the driver side.